ADICOMB is a range of professional combined trucks designed in Austria and assembled in Romania to withstand the harsh operating conditions specific to Romanian roads and sewerages.
Cleaning and maintainance of the sewerages and pipes is inconceivable without these performant equipments.


Operating Principle
The autocombined is equipped with a vacuum pump for absorption and a high pressure pump for cleaning the sewerages and pipes, the tank being divided into two compartments. One for the clean water and one for the rough parts, positioned so that it can be cleared. The vacuum pump is powered by the transmission belt or the cardan from the gearbox of the chassis by a power outlet, creating a vacuum in the tank.

When there is a vacuum inside the rough parts tank absorption is created by opening the valve of the drain hole, or by the absorption branch. If it is intended for the drain hole to discharge, the pump valve has to be operated, that reverses the air direction creating pressure in the tank. To clear the tank, the drain hole valve placed on the back side of the car needs to be opened. If desired, the drain cover with a diameter of 450 mm can be opened to. The vacuum pump has a valve for pressure relief that prevents the pump from being damaged.

The high pressure pump is operated by the transmission belt or the cardan from the gearbox of the chassis by a power outlet. The pump is supplied with water from the tank of the truck, creating a wash pressure of up to 200 bar. Depending on the level of equippment of the car, the high pressure pump has a protection system that impedes it from functioning without water, this preventing damage to the pump. With a 1" hose, wrapped on a special drum placed on the back side of the car, the pipes and sewers are staved. The end of the hose has different washing heads that help the hose advance and clear the blocks from sewerages.
The absorption system and the high pressure system can operate concurrently for a higher efficiency.


The AdiCOMB range of products does not limit only to the configurations or capacities presented below. Please contact us to benefit from our free consultancy service to choose the optimal configuration for you.



MODEL Type and characteristics of pumps Capacity TYPE of Wheelbase
ADICOMB 7 Air flow: 860 mc/h
Vacuum pressure: 0.5 bar
Power: 30 Kw
Rotation: 1500 rot/min
Flow: 190-283 l/min
Pressure: 200-135 bar
Power: 75 kw
7,5 m³ 15 t 3690
ADICOMB 10 Air flow: 1600 mc/h
Vacuum pressure: 0.5 bar
Power: 58 Kw
Rotation: 1500 rot/min
Flow: 269 ÷ 326 l/min
Pressure: 205 ÷ 170 bar
Power: 110 Kw
10 m³ 19 t 4200
ADICOMB 12 Air flow:1600 mc/h
Vacuum pressure: 0.5 bar
Power: 58 Kw
Rotation: 1500 rot/min
Flow: 269 ÷ 326 l/min
Pressure: 205 ÷ 170 bar
Power: 110 Kw
12 m³ 26 t 3820+1380
ADICOMB 14 Air flow: 1600 mc/h
Vacuum pressure: 0.5 bar
Power: 58 Kw
Rotation: 1500 rot/min
Flow: 269 ÷ 326 l/min
Pressure: 205 ÷ 170 bar
Power: 110 Kw
14 m³ 33 t 3820+1380



  • Volume divided into 2 compartments, one for water and one for sludge, painted with acrylic paint
  • Manhole ø 600mm - for access in the tank pozitioned on the water tank
  • Connecting pipes for discharge/clearing of the sludge from the tank DN125, DN100 pneumatic
Vacuum pump
  • According to sizing
High pressure pump
  • According to sizing 
  • Fixed main drum, situated in the back of the water tank for the high pressure hose of 1", controlled mechanically, manually, with an 80m 1" hose made of rubber with textile
Commands from the cabin


  • Switching the vacuum pump on/off;
  • Switching the pressure pump on/off


Safety systems
  • Safety valves on the vacuum circuit
  • Vacuum manometer; Water pressure manometer
  • Safety valves for the water circuit
  • Water level indicator; Mechanical level indicator for the sludge compartment
  • Automatic pressure regulator
  • Protection system for the high pressure pump
  • Stainless steel water filter with a sieve - to ease cleaning and maintenance
  • Noise damper
  • Buffer tank with safety(Expansion tank)
  • One on the cabin, one on the back side of the superstructure
Electrical equipment
  • Switchboard - Made of sealed stainless steel, with fireproof protection



  • Protection system against overloading of the high pressure circuit
  • Water heating system for the water in the tank with a Sirocco for using the equipment in winter time
  • Steel tank
  • Hydraulic system for tilting the tank 
  • Sludge discharge chute
  • Hydraulic system for closing the cap 
  • Manual system for closing the cap 
  • Hydraulic system for tilting the cap 
  • Pneumatic installation
  • 4 Horse power valve operated pneumatically
  • Mobile absorption arm DN100
  • Mobile absorption arm DN125
  • Main back drum with automatical winding, manual opening-closing 
  • Main back drum with automatical winding, hydraulical opening-closing 
  • Main back drum with manual winding, hydraulical opening-closing
  • Secondary drum manually operated for 40m hose - for cleaning the machine and the equipments, or cleaning sewerages and smaller pipes
  • Secondary drum hydraulically operated
  • Secondary low presure drum installed on the absorption arm with a ½" hose, L=15ml 
  • Washing hose ½ " of 40 m
  • Washing hose ½ " of 60 m 
  • Open tray for accessory supporting 
  • Lateral closed laminated steel box, painted in the colour of the tank on both sides of the tank-2 pieces
  • Lateral closed steel box
  • Lateral closed steel box painted in the colour of the tank/li>
  • Work surface cleaning gun ½" - with a washing head
  • Total pump and pipelines drain system by blowing compressed air from the pneumatic system of the chassis 
  • Absorption hose support secured on the vehicle - for transporting the hose
  • Joint for filling with water from the hydrant - for easy supply of the water equipment
  • Vice installed on the superstructure
  • Ladder with support
  • Opening/Coonecting pipes for clearing the coarse sludge from the tank and for maintainance with DN450
  • Absorption hose DN100 L = 3 m - 1 piece
  • Absorption LS pipe, with rapid hook L=1.5m 
  • Pipe for washing manhole with 4 nozzles
  • Automatic pneumatic system for changing discharge - absorption 
  • Work light secured on the equipment 
  • Mobile work light with 15m of cable and retractable drum included 
  • Additional beacon
  • Counter for vacuum pump functioning hours
  • Counter for high pressure pump functioning hours 
  • Washing heads 1" and/or ½"
  • Device for measuring hose ongoing
  • Sludge compartment tank washing system
  • System for separating water from sludge
  • Hydrant hose type C - 10ml - 2 pieces
  • Hose guiding system on the sewerage
  • Hose guiding system in the sewerage
  • Radio command with 15 channels 
  • Radio command with 5 channels 
  • Wire command -7 channels 
  • Wire command - 5 channels 
  • Monitoring - GPS monitoring system 
  • Reports
  • Purchasing the entire reporting system (soft)
  • A.D.R.
  • Special colour (different from standard)
  • Customized colour and design (multicolored)
  • Clearing opening 2" DN60
  • Absorption valve 3" - DN80
  • Connection parts for water supply from the hydrant DN100 and DN65
  • Water supply hose ¾" - 10m
  • Lateral boxes for the installing of hydraulic equipments
  • Walkie-talkie
  • Road signs
  • It is determined by the dimension of the superstructure



No matter in what part of the world our equipments function, they keep the environment clean and they do not pollute. We are firm to produce and supply environmentally friendly equipments in accordance with ISO 14.000 and the regulations in force.